SubsTech     
SubsTech     

to Metals
to Copper alloys

Cast manganese bronzes

Dr. Dmitri Kopeliovich

According to the Unified Numbering System (UNS):

Manganese Bronzes are copper alloys, containing 25-38% of zinc (Zn) as the major alloying element and 0.8-4.3% of manganese (Mn), 1-3% of iron (Fe) and up to 6.8% of aluminum (Al) as additional alloying elements. Manganese Bronzes are designated with the numbers from C86100 through C86800.

Manganese, iron and aluminum are added to the Manganese Bronzes for increasing their hardness and strength.

Manganese Bronzes possess very high mechanical strength combined with good ductility and good corrosion resistance.

Machinability of the Cast Brasses is moderate.

Manganese Bronzes are used for manufacturing large valve stems, flanges, gears, shafts, cams, heavy load bearings, bushings, screw down nuts, gun mounts, hydraulic cylinder parts, pump components, impellers, frames, high strength machine parts.

Chemical compositions of some cast manganese bronzes

UNS Designation Zn,% Mn,% Fe,% Al,% Pb,% Cu,%
C86100 balance 2.5-5.0 2.0-4.0 4.5-5.5 0.2 max. 66.0-68.0
C86200 22.0-28.0 2.5-5.0 2.0-4.0 3.0-4.9 0.2 max. 60.0-66.0
C86500 36.0-42.0 0.1-1.5 0.4-2.0 0.5-1.5 0.4 max. 55.0-60.0
C86700 30.0-38.0 0.1-3.5 1.0-3.0 1.0-3.0 0.5-1.5 66.0-68.0

Properties of some cast manganese bronzes

Related internal links

cast_manganese_bronzes.txt · Last modified: 2023/12/13 by dmitri_kopeliovich
Promote in SubsTech       Creative Commons License Except where otherwise noted, this work is licensed under a Creative Commons Attribution-Noncommercial-Share Alike 3.0 License