SubsTech     
SubsTech     
Command disabled: index

to Metals
to Aluminum alloys

Cast aluminum alloys

Properties of aluminum and its alloys favorable for casting applications

  • Low melting point;
  • Low solubility of gases (except Hydrogen);


to top

Disadvantages of aluminum castings

  • High hydrogen solubility;

The following casting methods are applicable for casting aluminum alloys:

Sand casting, permanent mold casting, die casting, investment casting, centrifugal casting, squeeze casting and continuous casting.

to top

Classification of cast aluminum alloys

Classification of cast aluminum alloys is developed by the Aluminum Association of the United States:

Each cast alloy is designated by a four digit number with a decimal point separating the third and the forth digits.

  • The first digit indicates the alloy group according to the major alloying element:

1xx.x aluminum, 99.0% minimum;

2xx.x copper (4%...4.6%);

3xx.x silicon (5%...17%) with added copper and/or magnesium;

4xx.x silicon (5%...12%);

5xx.x magnesium (4%...10%);

7xx.x zinc (6.2%...7.5%);

8xx.x tin;

9xx.x others.

  • The second two digits identify aluminum alloy or indicate the alloy purity.

In the alloys of the 1xx.x series the second two digits indicate the level of purity of the alloy – they are the same as the two digits to the right of the decimal point in the minimum concentration of aluminum (in percents): 150.0 means minimum 99.50% of aluminum in the alloy, 120.1 means minimum 99.20% of aluminum in the alloy.

In all other groups of aluminum alloys (2xx.x through 9xx.x) the second two digits signify different alloys in the group.

  • The last digit indicates the product form: casting (designated by “0”) or ingot (designated by “1” or “2” depending on chemical composition limits.)

A modification of the original alloy or impurity limits is indicated by a serial letter before the numerical designation. The serial letters are assigned in alphabetical order starting with A but omitting I, O, Q, and X (the letter “X” is reserved for experimental alloys).

to top

Characterization of aluminum alloys

Aluminum-copper cast alloys (2xx.x series)

  • Low corrosion resistance (susceptible to stress-corrosion cracking);
  • Low fluidity;
  • Low ductility;
  • Susceptible to hot cracks.

Applications:

Cylinder heads for automotive and aircraft engines, pistons for diesel engines, exhausting system parts.

Aluminum-silicon-copper/magnesium cast alloys (3xx.x series)

  • Heat-treatable;
  • High strength;
  • Low ductility;
  • Good wear resistance
  • Decreased corrosion resistance (in copper containing alloys);
  • Good fluidity;
  • Good machinability (in copper containing alloys).

Applications:

Automotive cylinder blocks and head, car wheels, aircraft fittings, casings and other parts of compressors and pumps.

Aluminum-silicon cast alloys (4xx.x series)

  • Non-heat-treatable;
  • Moderate strength;
  • Moderate ductility;
  • Good wear resistance;
  • Good corrosion resistance.

Applications:

Pump casings, thin wall castings, cookware.

Aluminum- magnesium cast alloys (5xx.x series)

  • Non-heat-treatable;
  • High corrosion resistance;
  • Good machinability;
  • Good appearance when anodized;
  • Moderate cast properties.

Applications:

Sand cast parts.

Aluminum-zinc cast alloys (7xx.x series)

  • Heat-treatable;
  • Good dimensional stability;
  • Good corrosion resistance;
  • Poor cast properties;
  • Good machinability (in copper containing alloys).

Aluminum-tin cast alloys (8xx.x series)

  • Non-heat-treatable;
  • Low strength;
  • Very good wear resistance;
  • Good machinability.

Applications:

Monometal (solid) and bi-metal slide bearings for internal combustion engines and other slide bearings applications.

to top

Chemical compositions of some cast aluminum alloys

Designation Si,% Cu,% Mn,% Mg,% Zn,% Ti,% Others,%
201.0 0.1 max. 4.0-5.2 0.2-0.5 0.15-0.55 - 0.15-0.35 Ag 0.4-1.0
208.0 2.5-3.5 3.5-4.5 0.5 max. 0.1 max. 1.0 max. 0.25 max. -
222.0 2.0 max. 9.2-10.7 0.5 max. 0.15-0.35 0.8 max. 0.25 max. -
333.0 8.0-10.0 3.0-4.0 0.5 max. 0.05-0.5 1.0 max. 0.25 max. -
356.0 6.5-7.5 0.25 max. 0.35 max. 0.2-0.45 0.35 max. 0.25 max. -
413.0 11.0-13.0 1.0 max. 0.35 max. 0.1 max. 0.5 max. - -
443.0 4.5-6.0 0.6 max. 0.5 max. 0.05 max. 0.5 max. 0.25 max. -
514.0 0.35 max. 0.15 max. 0.35 max. 3.5-4.5 0.15 max. 0.25 max. -
518.0 0.35 max. 0.25 max. 0.35 max. 7.5-8.5 0.15 max. - -
705.0 0.2 max. 0.20 max. 0.4-0.6 1.4-1.8 2.7-3.3 0.25 max. Cr 0.2-0.4
713.0 0.25 max. 0.4-1.0 0.6 max. 0.2-0.5 7.0-8.0 0.25 max. -
852.0 0.4 max. 1.7-2.3 0.1 max. 0.6-0.9 - 0.25 max. Sn5.5-7.0, Ni0.9-1.5

(concentration of aluminum - balance)

to top

Properties of some cast aluminum alloys

Related internal links

cast_aluminum_alloys.txt · Last modified: 2023/12/13 by dmitri_kopeliovich
Promote in SubsTech       Creative Commons License Except where otherwise noted, this work is licensed under a Creative Commons Attribution-Noncommercial-Share Alike 3.0 License