SubsTech     
SubsTech     
Command disabled: index

to Metals
to Metallographic examination

Scanning Electron Microscope

Dr. Dmitri Kopeliovich

Scanning Electron Microscopes (SEM) use focused beam of electrons, scanning in vacuum the specimen surface, imaging one point at a time.The interaction of the electron beam with every point of the specimen surface is registered, forming the entire image.

Since the wavelength of the electron beam is much lower than wavelength of the visible light, the magnification of SEM is much higher (thousands of times), than that of optical microscopes.

Resolution of SEM is about 1nm to 20 nm.

electron microscope.png

Electrons in the electron gun are emitted from the cathode and accelerated by the anode to the energy 1 – 50 keV.

The electron beam is condensed by the condenser lenses (one or two).

Magnetic field, produced by the scan coils deflects the electron beam back and forth.

The electron beam, focused by the objective lens to very fine spot (1-5 nm), scans the sample surface in a raster pattern.

Primary electrons interact with the atoms of the sample surface, causing emissions of the secondary electrons, which are detected, producing the image.

The backscattered electrons of the electron beam may also be detected.

The backscattered electron image is used for contrasting the sample regions, having different chemical compositions.

X-Ray Microanalysis

Interaction of the electron beam with the specimen atoms results in emission of x-rays, which are detected and analyzed by X-Ray Spectroscope. This allows to produce qualitative and quantitative analyses of the different regions of the sample.

to top


Related internal links

scanning_electron_microscope.txt · Last modified: 2023/12/13 by dmitri_kopeliovich
Promote in SubsTech       Creative Commons License Except where otherwise noted, this work is licensed under a Creative Commons Attribution-Noncommercial-Share Alike 3.0 License