Main page
About us
Engine Bearings Consulting
Advertising Opportunities
Materials Engineering
Metals
Ceramics
Polymers
Composites
Fluids
Engine bearings
Materials Data
Materials Links
Index of SubsTech articles
to Stainless steels
to Properties of steels and cast irons
(submitted by the website administration)
| AISI 410 | ||||
| Chemical composition: C=0.15%max, Mn=1%max, Cr=12.5% | ||||
| Property | Value in metric unit | Value in US unit | ||
| Density | 7.7 *10³ | kg/m³ | 481 | lb/ft³ |
|---|---|---|---|---|
| Modulus of elasticity | 200 | GPa | 29000 | ksi |
| Thermal expansion (20 ºC) | 9.9*10-6 | ºCˉ¹ | 5.5*10-6 | in/(in* ºF) |
| Specific heat capacity | 460 | J/(kg*K) | 0.11 | BTU/(lb*ºF) |
| Thermal conductivity | 24.9 | W/(m*K) | 173 | BTU*in/(hr*ft²*ºF) |
| Electric resistivity | 5.7*10-7 | Ohm*m | 5.7*10-5 | Ohm*cm |
| Tensile strength (annealed) | 520 | MPa | 75400 | psi |
| Yield strength (annealed) | 275 | MPa | 40000 | psi |
| Elongation (annealed) | 30 | % | 30 | % |
| Hardness (annealed) | 82 | RB | 82 | RB |
| Tensile strength (cold drawn) | 834 | MPa | 121000 | psi |
| Yield strength (cold drawn) | 721 | MPa | 105000 | psi |
| Elongation (cold drawn) | 21 | % | 21 | % |
| Hardness (cold drawn) | 24 | RC | 24 | RC |
