SubsTech     
SubsTech     
Command disabled: index

to Classification of adhesives
to Properties of polymers

Single component high strength epoxy adhesive

(submitted by the website administration)

Single component high strength epoxy adhesive
Single component high strength, free flowing epoxy adhesive
Property Value in metric unit Value in US unit
Viscosity at 77°F (25°C) 200000 cP 4.18 lbf*sec/ft²
Cure time at 248°F (120°C) 60 min 60 min
Maximum gap 0.5 mm 0.02 in
Shear strength, steel-to-steel 77°F (25°C) 34 MPa 5000 psi
Peel strength, steel-to-steel 77°F (25°C) 112 N/(25mm width) 25 PIW (lbf/inch width)
Min. service temperature -40 ºC -40 ºF
Max. service temperature 180 ºC 355 ºF

Related internal links

single_component_high_strength_epoxy_adhesive.txt · Last modified: 2023/12/14 by dmitri_kopeliovich
Promote in SubsTech       Creative Commons License Except where otherwise noted, this work is licensed under a Creative Commons Attribution-Noncommercial-Share Alike 3.0 License