SubsTech     
SubsTech     
Command disabled: export_raw

to Classification of adhesives
to Properties of polymers

General purpose anaerobic adhesive

(submitted by the website administration)

General purpose anaerobic adhesive
Single component acrylic based adhesive
Property Value in metric unit Value in US unit
Viscosity at 77°F (25°C) 1300 cP 0.0272 lbf*sec/ft²
Fixture time, steel, 77°F (25°C) 10 min 10 min
Maximum gap 0.152 mm 0.006 in
Shear strength, steel, 77°F (25°C) 10 MPa 1450 psi
Min. service temperature -54 ºC -65 ºF
Max. service temperature 150 ºC 302 ºF

Related internal links

general_purpose_anaerobic_adhesive.txt · Last modified: 2023/12/14 by dmitri_kopeliovich
Promote in SubsTech       Creative Commons License Except where otherwise noted, this work is licensed under a Creative Commons Attribution-Noncommercial-Share Alike 3.0 License