SubsTech     
SubsTech     
Command disabled: index

to Wrought aluminum-magnesium alloys (5xxx)
to Properties of aluminum alloys

Wrought aluminum-magnesium alloy 5652

(submitted by the website administration)

Wrought aluminum-magnesium alloy 5652
Chemical composition: Mg=2.5%, Cr=0.25%, Al balance
Property Value in metric unit Value in US unit
Density 2.67 *10³ kg/m³ 167 lb/ft³
Modulus of elasticity 70 GPa 10200 ksi
Thermal expansion (20 ºC) 23.8*10-6 ºCˉ¹ 13.2*10-6 in/(in* ºF)
Specific heat capacity 900 J/(kg*K) 0.215 BTU/(lb*ºF)
Thermal conductivity 138 W/(m*K) 960 BTU*in/(hr*ft²*ºF)
Electric resistivity 4.99*10-8 Ohm*m 4.99*10-6 Ohm*cm
Tensile strength (annealed) 193 MPa 28000 psi
Yield strength (annealed) 90 MPa 13000 psi
Elongation (annealed) 25 % 25 %
Shear strength (annealed) 124 MPa 18000 psi
Fatigue strength (annealed) 110 MPa 16000 psi
Hardness (annealed) 47 HB 47 HB
Tensile strength (H38) 290 MPa 42000 psi
Yield strength (H38) 255 MPa 37000 psi
Elongation (H38) 7 % 7 %
Shear strength (H38) 165 MPa 24000 psi
Fatigue strength (H38) 138 MPa 20000 psi
Hardness (H38) 77 HB 77 HB
Annealing temperature 343 ºC 650 ºF

Related internal links

wrought_aluminum-magnesium_alloy_5652.txt · Last modified: 2023/12/13 by dmitri_kopeliovich
Promote in SubsTech       Creative Commons License Except where otherwise noted, this work is licensed under a Creative Commons Attribution-Noncommercial-Share Alike 3.0 License