SubsTech     
SubsTech     
Command disabled: index

to Cast aluminum alloys
to Properties of aluminum alloys

Cast aluminum alloy 356.0

(submitted by the website administration)

Cast aluminum alloy 356.0
Chemical composition: Si=7%, Mg=0.33%, Al balance, permanent mold casting
Property Value in metric unit Value in US unit
Density 2.68 *10³ kg/m³ 167 lb/ft³
Modulus of elasticity 72 GPa 10500 ksi
Thermal expansion (20 ºC) 21.4*10-6 ºCˉ¹ 11.9*10-6 in/(in* ºF)
Specific heat capacity 963 J/(kg*K) 0.230 BTU/(lb*ºF)
Thermal conductivity 167 W/(m*K) 1160 BTU*in/(hr*ft²*ºF)
Electric resistivity 4.0*10-8 Ohm*m 4.0*10-6 Ohm*cm
Heat of fusion 3.89*105 J/kg 167 BTU/lb
Liquidus temperature 613 ºC 1140 ºF
Solidus temperature 557 ºC 1030 ºF
Tensile strength (F) ,min. 145 MPa 21000 psi
Elongation (F) ,min. 3 % 3 %
Shear strength (F) 91 MPa 13200 psi
Hardness (F) , range 40-70 HB 40-70 HB
Tensile strength (T6) 240 MPa 34800 psi
Yield strength (T6) 225 MPa 32630 psi
Elongation (T6) 4 % 4 %
Shear strength (T6) 205 MPa 29700 psi
Fatigue strength (T6) 90 MPa 13100 psi
Hardness (T6) , range 65-95 HB 65-95 HB
Solution temperature 541 ºC 1005 ºF
Aging temperature 154 ºC 310 ºF
Aging time 2-5 hrs. 2-5 hrs.

Related internal links

Related external links

cast_aluminum_alloy_356.0.txt · Last modified: 2012/06/02 by dmitri_kopeliovich
Promote in SubsTech       Creative Commons License Except where otherwise noted, this work is licensed under a Creative Commons Attribution-Noncommercial-Share Alike 3.0 License