SubsTech     
SubsTech     

to Metals
to Corrosion and oxidation

Volatile corrosion inhibitors (VCI)

Dr. Dmitri Kopeliovich

Volatile corrosion inhibitors (VCI) are substance molecules of which vaporize at a significant pressure and then adsorb on the metal surface forming a thin corrosion protection layer.

How Volatie Corrosion Inhibitors (VCI) work

VCI are capable to reduce corrosion in enclosed spaces (e.g. package bags).
The protective vapor is emitted by a VCI containing material and then it is distributed throughout the space migrating to the part surface and penetrating into crevices, cracks, small holes and other hard-to-reach regions. The vapors condense on the metal surface in form of microscopic crystals, which dissolve in the moisture film present on the surface.
The ions of the dissolved VCI displace water molecules from the metal surface and form monomolecular invisible protection film reducing the corrosion rate.
The protective VCI film serves as a barrier repelling water and decreasing the diffusion of Oxygen to the metal surface. VCI molecules also controls the PH level in the electrolyte.

Effectiveness of VCI depends on their vapor pressure. Too high vapor pressure allows fast evaporation and distribution of the inhibitor in the surrounding atmosphere. However the resulting protective layer is unstable. Its molecules have a tendency to vaporize from the metal surface.
Too low vapor pressure produces a stable protective layer but the process of its formation is very slow.

First VCI were anodic corrosion inhibitors (sodium nitrite, sodium benzonate). They were developed for protection of ferrous metals. Anodic VCI restrict the anodic reactions by the mechanism of anodic passivation when a thin film of VCI prevents corrosion of the metal.
Anodic VCI are hazardous substances. They also may attack non-ferrous alloys.

Later mixed (ambiodic) Volatile Corrosion Inhibitors (VCI) have been developed. They are capable to combine the effects of both anodic and cathodic inhibitors. A depressing of the cathodic reaction is achieved due to the restriction of the oxygen transportation.

Volatile corrosion inhibitors may be added to various package materials: polymer film (eg. low density polyethylene), paper, foam, powder, powder sachets, oils, tablets. carton chips, etc.).

to top

Typical Volatile Corrosion Inhibitors (VCI)

Most Volatile Corrosion Inhibitors (VCI) are aminocarboxilates - products of reaction between an organic acid with an amine or amine derivatives.

The following compounds are used as Volatile corrosion inhibitors (VCI):

  • Sodium nitrite;
  • Sodium benzonate;
  • Sodium molybdate;
  • Sodium sebacate;
  • Cyclohexylamine;
  • Dicyclohexylamine;
  • Guanidine;
  • Aminoalcohols;
  • Ammonium benzonate;
  • Triethanolammonium nitrate;
  • N,N-dimethyl aminopropionitrile;
  • Diethyl ammonium caprylate;
  • Triazole.

to top

Advantages of Volatile Corrosion Inhibitors (VCI)

  • Provide excellent corrosion protection of ferrous and non-ferrous metals.
  • Do not change the part dimensions, surface properties and appearance in contrast to other corrosion protection methods like coatings and Rust protection oils.
  • Fast and easy removal. VCI film vaporizes from the part surface immediately after the part is removed from the enclosed space.
  • Environmental friendliness and safety.

to top


Related internal links

volatile_corrosion_inhibitors_vci.txt · Last modified: 2023/12/13 by dmitri_kopeliovich
Promote in SubsTech       Creative Commons License Except where otherwise noted, this work is licensed under a Creative Commons Attribution-Noncommercial-Share Alike 3.0 License