SubsTech     
SubsTech     

SubsTech’s sister website Smooth Sliding provides independent engineering consulting services that help you to solve engine bearing related issues: failures, material selection, geometry design and optimization of hydrodynamic conditions.

Smooth Sliding is an engineering consulting company run by Dr. Dmitri Kopeliovich:

  • World leading expert (32 years of experience) in design, technology and materials for Engine bearings in applications such as automotive, renewable energy, aviation, racing and others.
  • Founder and owner of SubsTech (Substances & Technologies) – a leading professional website on Materials Science and Engineering.
  • Author of numerous scientific and engineering publications and patents.
  • Founder and owner of Smooth Sliding.

For further information and for requesting consulting services please visit our sister website Smooth Sliding.



to Metals
to Engine bearings

Tin based engine bearing overlays

Dr. Dmitri Kopeliovich

Tin based overlays contain copper (3-6%) as a hardening component.
The alloys are developed to replace toxic lead based overlays.
Tin based overlays possess excellent corrosion resistance and cavitation resistance.

Overlay multilayer system of Sn6Cu alloy deposited on the bi-layer diffusion barrier Ni-SnNi allows to create a microhardness gradient across the overlay thickness due to varying content of copper (soft top layer and hard bottom layer of the overlay). Such multilayer bearings are capable to withstand alternating loads up to 11600-13000 psi (80-90 MPa).
Hardness of tin-copper overlays is 20-30 HV.

Tin-copper overlays are deposited by the electroplating methods.

Nickel diffusion barrier (nickel dam) is deposited between the intermediate layer and tin containing overlay in order to prevent migration of tin from the overlay into the intermediate material (copper).
Diffusion of tin into copper causes formation of brittle Cu-Sn intermetallic compounds (Cu3Sn, Cu6Sn5), which decrease the adhesion strength of the overlay to the intermediate layer. In addition to this decrease of the tin content in the overlay due to migration into intermediate material deteriorates the Corrosion resistance of the lead-based overlay alloy.
Thickness of nickel diffusion barrier is about 0.00004”-0.00006” (1-1.5 µm).
Nickel electroplating methods (Watts nickel plating solutions or nickel sulfamate solutions) are used for the diffusion barrier deposition.

to top


Related internal links


to Metals
to Engine bearings

tin_based_engine_bearing_overlays.txt · Last modified: 2023/12/13 by dmitri_kopeliovich
Promote in SubsTech       Creative Commons License Except where otherwise noted, this work is licensed under a Creative Commons Attribution-Noncommercial-Share Alike 3.0 License