SubsTech     
SubsTech     

to Thermoplastics
to Properties of polymers

Thermoplastic Low Density Polyethylene (LDPE)

(submitted by the website administration)

Thermoplastic
Low Density Polyethylene (LDPE)
Property Value in metric unit Value in US unit
Density 0.92 *10³ kg/m³ 57.4 lb/ft³
Modulus of elasticity 0.29 GPa 42 ksi
Tensile strength 17 MPa 2500 psi
Elongation 500 % 500 %
Flexural strength 14 MPa 2000 psi
Thermal expansion (20 ºC) 16*10-5 ºCˉ¹ 9*10-5 in/(in* ºF)
Thermal conductivity 0.33 W/(m*K) 2.29 BTU*in/(hr*ft²*ºF)
Melting point 120 ºC 248 ºF
Maximum work temperature 90 ºC 194 ºF
Electric resistivity 1013-1016 Ohm*m 1015-1018 Ohm*cm
Dielectric constant 2.3 - 2.3 -
  • Good impact strength;
  • Good chemical resistance;
  • Good flexibility;
  • Poor UV resistance;
  • Good hot formability.

Applications: packaging films (general purpose, shrink, lamination), containers, cable insulation, chemically resistant linings.

Related internal links

thermoplastic_low_density_polyethylene_ldpe.txt · Last modified: 2023/12/14 by dmitri_kopeliovich
Promote in SubsTech       Creative Commons License Except where otherwise noted, this work is licensed under a Creative Commons Attribution-Noncommercial-Share Alike 3.0 License