SubsTech     
SubsTech     

to Thermoplastics
to Properties of polymers

Polyvinylidene fluoride (PVDF)

(submitted by the website administration)

Thermoplastic
Polyvinylidene fluoride (PVDF)
Property Value in metric unit Value in US unit
Density 1.78*10³ kg/m³ 111.1 lb/ft³
Modulus of elasticity 1.95 GPa 283 ksi
Tensile strength 55 MPa 8000 psi
Elongation (max.) 250 % 250 %
Notched impact strength 33 kJ/m2 15.7 ft*lbf/in2
Hardness 79 Shore D 79 Shore D
Thermal expansion (20 ºC) 130*10-6 ºCˉ¹ 72*10-6 in/(in* ºF)
Thermal conductivity 0.16 W/(m*K) 1.11 BTU*in/(hr*ft²*ºF)
Melting point 170 ºC 338 ºF
Maximum work temperature 150 ºC 302 ºF
Dielectric constant 7 - 7 -
Dielectric strength 25 kV/mm 635 V/mil
Electrical resistivity 1.5*1012 Ohm*m 1.5*1014 Ohm*cm
  • Excellent mechanical strength;
  • Excellent toughness;
  • Excellent stiffness;
  • Good chemical resistance;
  • Good creep resistance;
  • High abrasion resistance;
  • High dielectric strength.

Applications: tubes for chemicals, valves, gaskets, pump parts for chemical industry.

Related internal links

polyvinylidene_fluoride_pvdf.txt · Last modified: 2023/12/14 by dmitri_kopeliovich
Promote in SubsTech       Creative Commons License Except where otherwise noted, this work is licensed under a Creative Commons Attribution-Noncommercial-Share Alike 3.0 License