SubsTech     
SubsTech     

to Thermoplastics
to Properties of polymers

Fluorinated ethylene propylene (FEP)

(submitted by the website administration)

Thermoplastic
Fluorinated ethylene propylene (FEP)
Property Value in metric unit Value in US unit
Density 2.15*10³ kg/m³ 134.2 lb/ft³
Modulus of elasticity 0.345 GPa 50 ksi
Flexural Modulus 0.62 GPa 90 ksi
Tensile strength 21 MPa 3000 psi
Elongation (max.) 300 % 300 %
Compressive strength 15 MPa 2200 psi
Impact strength, notched Izod no break J/m no break ft*lb/in
Hardness 55 Shore D 55 Shore D
Thermal expansion (20 ºC) 100*10-6 ºCˉ¹ 56*10-6 in/(in* ºF)
Thermal conductivity 0.20 W/(m*K) 1.4 BTU*in/(hr*ft²*ºF)
Melting point 270 ºC 518 ºF
Maximum work temperature 200 ºC 392 ºF
Dielectric constant 2.1 - 2.1 -
Dielectric strength 100 kV/mm 2500 V/mil
Electrical resistivity >1016 Ohm*m >1018 Ohm*cm
  • Excellent chemical resistance;
  • Wide service temperature range;
  • Excellent electrical insulation properties;
  • Good resistance to UV radiation.

Applications: chemical processing equipment, heat exchangers, wire coating insulation, fiber optic, medical tubing.

Related internal links

fluorinated_ethylene_propylene_fep.txt · Last modified: 2023/12/14 by dmitri_kopeliovich
Promote in SubsTech       Creative Commons License Except where otherwise noted, this work is licensed under a Creative Commons Attribution-Noncommercial-Share Alike 3.0 License